Brother MFC-8220 Service Manual page 38

CHAPTER 2 INSTALLATION AND BASIC OPERATION
(15) Select Local Interface, and then click Next.
(16) Select Standard, and then click Next. The application files will be copied and installed to
your computer.
NOTE:
• If you want to install the PS Brother (PostScript
follow the on-screen instructions.
• When the Select Components screen appears, check PS Printer Driver, and then
continue following the on-screen instructions.
< For Windows
Make sure that you followed the instructions in (1) to (16) on
(17) When this screen appears, connect the USB interface cable to your PC, and then
connect it to the machine.
Plug the machine into the AC power outlet. Turn the power switch on.
It will take a few seconds for the installation screen to appear.
The installation of the Brother drivers will automatically start. Follow the instructions on
the screen.
(18) Select BRUSB: USB Printer Port, and then click Next.
(19) Accept the default Printer name by selecting Yes, and then click Next.
(20) Select Yes (recommended), and then click Finish. A test page will be printed so you
can check the print quality.
(21) If the test page is printed correctly, click Yes. If you click No, follow the prompts on the
screen to correct the problem.
NOTE:
If the README file shown in step (22) appears, close the README.WRI file and then
click Finish after printing the page.
(22) The README file will be displayed. Please read this file for troubleshooting information
and then close the file to continue installation.
(23) Check the Run On-Line Registration and then click Next.
(24) Click Finish to restart your computer.
(25) After the computer restarts, click Yes to have the Control Center load each time
Windows
If you click No the Scan key on the machine will be disabled.
NOTE:
Even if you select NO, you will be able to launch the Brother Control Center later to use
the Scan key by double-clicking the Smart UI icon on the desktop. This loads the
Brother Control Center to the task tray. See AutoLoad the Brother Control Center,
Chapter 4 in the Documentation (Software User's Guide) located on the CD-ROM.
OK:
The Brother PC-FAX, Printer and Scanner drivers have been installed and the
installation is now complete.
®
98/98SE/Me Users Only >
®
is started. The Control Center will appear as an icon in the task tray.
®
) driver, select Custom and then
pages 2-13 to
2-14
2-14.