Brother MFC-8220 Service Manual page 97

(9) Remove the actuator F.
(10) Release the lock of the connector, remove the cable from the panel PCB ASSY, and
then remove the FPC key.
NOTE:
• After disconnecting flat cable(s), check that each cable is not damaged at its end or
short-circuited.
• When connecting flat cable(s), do not insert them at an angle. After insertion, check
that the cables are not at an angle.
Control panel ASSY
Paper feed chute
Actuator F
Fig. 4-31
Fig. 4-32
4-19
2
1
Cable
Cable
Panel PCB ASSY
MFC-8220
SERVICE MANUAL
FPC key