Brother MFC-8220 Service Manual page 19

CHAPTER 1 GENERAL
(2) Size
Size
(3) Other specifications
<In the case of Paper Tray>
Weight
Thickness
Moisture content
<In the case of Manual Feed Tray>
Weight
Thickness
Moisture content
(4) Recommended paper
Plain Paper
Transparency
Labels
!
CAUTION:
When you are choosing print media, be sure to follow the information given below to prevent
any paper jams, print quality problems or machine damage;
• It is recommended to use long-grained paper for the best print quality. If short-grained
paper is being used, it might be the cause of paper jams.
• Use neutral paper. Do not use acid paper to avoid any damage to the drum unit.
• Avoid using coated paper such as vinyl coated paper.
• Avoid using preprinted or highly textured paper.
• It is recommended to use labels or transparencies which are designed for use in laser
printers.
• Avoid feeding labels with the carrier sheet exposed, or the machine will be damaged.
• Before loading paper with holes such as organizer sheets, be sure to fan the stack well.
• Do not use organizer sheets that are stuck together. The glue that is used might caused
damaged to the machine.
• When printing on the back of pre-printed paper, if the paper is curled, be sure to straighten
the paper as much as possible.
• Different types of paper should not be loaded at the same time in the paper tray to avoid
any paper jams or misfeeds.
Paper tray (Tray #1)
A4, Letter, JIS B5, ISO B5,
ISO B6, A5, A6, Legal,
Executive
Plain paper (Recycled paper)
60 to 105 g/m
0.08 to 0.13 mm
4 to 6% of weight
Manual feed tray
Horizontal:
69.8 to 220.0mm
Vertical:
116.0 to 406.0mm
2
Plain paper
2
60 to 161g/m
0.08 to 0.2mm
4 to 6% of weight
Plain paper: Xerox 4200 20lb
Hammermill Laser Paper 24lb
3M CG 3300
Avery laser label # 5160
1-6
Lower tray (Tray #2)
A4, Letter, JIS B5, ISO B5, ISO
B6, A5, Legal, Executive
Envelope
2
75 to 90g/m
equivalent to one sheet
0.084 to 0.12mm
equivalent to one sheet
4 to 6% of weight