Wsw21 Tad Setting; Wsw22 Ecm Setting - Brother MFC-8220 Service Manual

Selector
No.
1
| Not used.
7
Erasure of message stored in the
memory after the message
8
transfer
l Selector 8: Erasure of message
Setting this selector to "0" will erase the message recorded in the memory after the document
retrieval feature transfers the message.
Selector
No.
1 ECM* in sending
2 ECM* in receiving
3 Call Waiting Caller ID
4
| Not used.
8
NOTE:
•
Selector 3 is applicable to the American version only, but not applicable to those models
equipped with high-speed modem.
•
Selectors 5 through 8 are applicable to the Asian version only.
l Selector 3: Call Waiting Caller ID
Setting this selector to "0" allows the user to decide whether or not to interrupt the current call
when a new call comes in. If Call Waiting Caller ID service is available in the area and the
user subscribes to it, he/she can see information about his/her incoming call.
WSW21 (TAD setting 1)
Function
WSW22 (ECM setting)
Function
A-27
Setting and Specifications
0: Yes 1: No
Setting and Specifications
0: ON 1: OFF
0: ON 1: OFF
0: ON 1: OFF
* ECM: Error correction mode
MFC-8220
SERVICE MANUAL