3.
INSTALL THE MACHINE
You need to implement hardware setup and driver installation to use the machine.
Firstly, identify the Operating System on your computer. (Windows
®
4.0/ Windows
(Parallel, USB or Network) for your computer. Most existing parallel cables support bi-
directional communication, but some might have an incompatible pin assignment or may not
be IEEE 1284-compliant.
The installation programs for the hardware setup and driver installation are contained on the
supplied CD-ROM.
3.1
For All Users
For Windows
(1) Turn on the PC power. Insert the supplied CD-ROM into the CD-ROM drive. The
opening screen will appear automatically. Follow the on-screen instructions.
NOTE:
If the opening screen does not appear; click Start and select Run. Then, enter the CD-drive
letter and type \START.EXE (for example: D:\START.EXE).
(2) Click the Initial Setup icon on the menu screen.
(3) You can view the Initial Setup instructions.
For Macintosh
(1) Turn on the Macintosh. Insert the CD-ROM into the CD-ROM drive.
(2) Double click the Start Here! icon or Start Here OS X icon. Follow the on-screen
instructions.
(3) Click the Initial Setup icon on the menu screen.
(4) You can view the Initial Setup instructions.
2000/XP and Macintosh) Then, purchase the appropriate interface cable
â â â â
users
â â â â
users
2-5
SERVICE MANUAL
®
®
95/98/Me, Windows
MFC-8220
NT