Brother MFC-8220 Service Manual page 121

(23) Disconnect the connector for the eject sensor harness from the thermistor relay PCB
ASSY.
(24) Release the eject sensor harness from the three hooks.
(25) Remove the bind B M3x10 Taptite screw, and then remove the eject sensor PCB ASSY.
(26) Remove the bind B M3x10 Taptite screw, and then remove the thermistor relay PCB
ASSY.
Eject sensor harness
Thermistor relay PCB ASSY
Taptite, bind B M3x10
(27) Remove the paper eject actuator and eject actuator spring.
Hook
Hooks
Fig. 4-77
Paper eject actuator
1
Fig. 4-78
4-43
Hook
Taptite, bind B M3x10
Eject sensor PCB ASSY
FU frame lower
Eject actuator spring
3
2
FU frame lower
MFC-8220
SERVICE MANUAL