Appendix 1 Eeprom Customizing Codes - Brother MFC-8220 Service Manual

APPENDIX 1
This function allows you to customize the EEPROM according to language, function settings,
and firmware switch settings.
< Operating Procedure >
(1) To make the machine enter the maintenance mode, press the Menu button,
*, 2, 8, 6, and 4 keys in this order.
Within 2 seconds
The machine beeps for approx. one second and displays "
on the LCD, indicating that it is placed in the initial stage of the maintenance mode, a
mode in which the machine is ready to accept entry from the keys.
(2) Press the 7 and 4 keys in this order in the initial stage of the maintenance mode.
The current customizing code (e.g., 9001 in the case of MFC8220 U.S.A. version)
appears.
(3) Enter the desired customizing code (e.g., 9001 in the case of MFC8220 U.S.A.
version). The newly entered code appears.
NOTE:
The machine does not work properly when an incorrect code is entered.
(4) Press the Start button.
The machine saves the setting and returns to the initial stage of the maintenance
mode.
If you press the Stop/Exit button or no keys are pressed for one minute in the above
procedure, the machine stops the procedure and returns to the initial stage of the
maintenance mode.
< EEPROM Customizing Codes List >
Pan/Nordic (Norway, Finland, Sweden)
EEPROM CUSTOMIZING CODES
Versions
U.S.A.
Canada
Germany
United Kingdom
France
Belgium
New Zealand
Switzerland
Ireland
Denmark
Austria
Spain
Italy
Portugal
General
Models
MFC-8220
9001
0002
0003
0004
0005
0008
0009
0010
0004
0013
0003
0015
0016
0018
0057
0050
A-1
MFC-8220
SERVICE MANUAL
"