Step 1; Setting Up The Machine; Removing The Protective Parts; Attaching The Paper Tray And Support - Brother MFC-3420C Quick Setup Manual

Step 1

Removing the Protective
1
Parts
1
Remove the protective tape and paper in
the ADF.
Do NOT connect the USB cable.
Connecting the USB cable is done
when installing the driver.
2
Open the scanner cover by lifting it up.
3
Pull the protective yellow bar out of the
machine.
Protective Yellow Bar
Do not throw away the protective yellow bar.
You will need it in the future to transport the
machine.
4
Close the scanner cover.
4

Setting Up the Machine

Scanner Cover
Protective
Yellow Bar
Attaching the Paper Tray
2
and Support
1
Insert the paper tray from above into the
back of the MFC.
2
Attach the output paper support to the paper
output slot, and then pull out the extension.
Output Paper Support
Output Paper
Support Extension
Paper Tray