Digital Tad (Mfc-660Cn And Mfc-845Cw Only); Tad-Mode For Internal Tad; Setting Up The Tad; Outgoing Message (Ogm) - Brother MFC-440CN User Manual

Digital TAD (MFC-660CN and
9
MFC-845CW only)
TAD-Mode for internal
TAD
The TAD feature will store up to 99 incoming
messages. Messages are stored in the order
in which they are received.
Voice messages can be up to 3 minutes in
length, and can also be picked up remotely
(see Using your Remote Access Code
on page 78). The number of messages you
can store will depend on how much memory
is being used by other features (for example,
delayed and stored faxes).

Setting up the TAD

Recording the TAD outgoing message is the
first step you need to follow before you can
use the TAD feature.
To enter TAD mode, follow the steps below:
a
Record your TAD OGM.
b
Press to activate the TAD mode.

Outgoing message (OGM)

Recording your OGM
You can record the following two different
types of OGM:
TAD Message
This message will be played when a call is
received. The caller will be able to leave a
voice or fax message.
F/T Message
This message is played when a call is
received and your machine is set to
Fax/Tel mode. The caller will not be able
to leave a message. See Fax/Tel OGM
on page 68.
a
Press Menu.
b
Press a or b to choose Fax.
9
Press OK.
c
Press a or b to choose Setup TAD.
Press OK.
d
Press a or b to choose OGM.
Press OK.
The LCD prompts you to choose an
OGM.
e
Press a or b to choose either
TAD Message or F/T Message, then
press OK.
f
Press a or b to choose Record MSG.
9
Press OK.
g
Record your message, using one of the
options below:
(MFC-660CN only)
Pickup the handset, record your
message, and replace the handset
when finished.
(MFC-845CW only)
Use the integrated microphone
record your message. Press
Stop/Exit when finished.
9
The TAD will play your OGM back to
you.
9
h
Press Stop/Exit.
9
9
to
67