Digital Tad (Mfc-665Cw Only); Tad-Mode For Internal Tad; Setting Up The Tad; Outgoing Message (Ogm) - Brother MFC-440CN User Manual

9

Digital TAD (MFC-665CW only)

TAD-Mode for internal
TAD
The TAD (Telephone Answering Device)
feature will store up to 99 incoming voice or
fax messages. Messages are stored in the
order in which they are received.
Voice messages can be up to 3 minutes in
length, and can also be picked up remotely
(see Using your Remote Access
Code on page 83). The number of messages
you can store will depend on how much
memory is being used by other features (for
example, delayed and stored faxes).

Setting up the TAD

Recording the TAD outgoing message is the
first step you need to follow before you can
use the TAD feature.
To enter TAD mode, follow the steps below:
a
Record your TAD OGM.
b
Press to activate the TAD mode.

Outgoing message (OGM)

Recording your OGM
You can record the following two different
types of OGM:
Msg Ctr OGM
This message will be played when a voice
call is received in TAD mode. The caller
will be able to leave a voice or fax
message.
72
F/T OGM
This message is played when a call is
received and your machine is set to
9
Fax/Tel mode. The caller will not be able
to leave a message. See Fax/Tel
OGM on page 73.
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose Setup Msg
Ctr.
Press OK.
d
Press a or b to choose OGM.
Press OK.
9
The LCD prompts you to choose an
OGM.
e
Press a or b to choose Msg Ctr OGM
or F/T OGM, then press OK.
f
Press a or b to choose Record MSG.
Press OK.
g
Record your message, using one of the
options below:
Pickup the handset, record your
message, and replace the handset
9
when finished.
The TAD will play your OGM back to
you.
9
h
Press Stop/Exit.
9