Wsw21 Tad Setting; Wsw22 Ecm Setting - Brother MFC8420 Service Manual

APPENDIX 3 FIRMWARE SWITCHS (WSW)
Selector
No.
1
|
7
8
l Selector 8:
Setting this selector to "0" will erase the message recorded in the memory after the document
retrieval feature transfers the message.
Selector
No.
1
2
3
4
5
|
8
NOTE:
•
Selector 3 is applicable to the American version only, but not applicable to those models
equipped with high-speed modem.
•
Selectors 5 through 8 are applicable to the Asian version only.
l Selector 3:
Setting this selector to "0" allows the user to decide whether or not to interrupt the current call
when a new call comes in. If Call Waiting Caller ID service is available in the area and the
user subscribes to it, he/she can see information about his/her incoming call.
WSW21 (TAD setting 1)
Function
Not used.
Erasure of message stored in the
memory after the message
transfer
Erasure of message
WSW22 (ECM setting)
Function
ECM* in sending
ECM* in receiving
Call Waiting Caller ID
Not used.
Not used.
Call Waiting Caller ID
Setting and Specifications
0: Yes
Setting and Specifications
0: ON
0: ON
0: ON
A-28
1: No
1: OFF
1: OFF
1: OFF
* ECM: Error correction mode