Time control
Editing switching times
The stored switching times are sorted and displayed according to date and time. A symbol indi-
cating the function to be activated is displayed below the time line. You can scroll the entries by
using the
or
Symbols
1
: target MSN for the corresponding function
: answer mode
: call forwarding
: do not disturb function
OGM7
: target outgoing message
--
: no function
Remark:
Symbol: . . . . . . . . . . . . . . . . . . . . . . . . . . . .function will be activated.
Symbol in reverse: . . . . . . . . . . . . . . . . . . . .function will be deactivated.
No symbol: . . . . . . . . . . . . . . . . . . . . . . . . .no function.
From the initial state, press the following
button:
, appointments/time ctrl.
Menu
change time
1.
Press the speed dialling station next
to the displayed switching time.
2.
Press
.
Stop
In order to erase an entry:
1.
Press the speed dialling station next
to "
".
buttons.
01
10:15
13.04.97 .........................
1:
08:30
26.05.97 .........................
02
1:
--
<< time control
.
Ans.7
--
--
,
The complete entry including the entry fields is
displayed. You may now make your corrections.
The corrected entry is stored.
Confirm safety verification. The entry is era-
sed.
59