Initial Operation; Scope Of Supply/Special Accessories - TIPTEL 195 Operating Instructions Manual

Initial operation

Scope of supply
The tiptel 195 is supplied complete with:
m a power supply unit
m a telephone cord
m a curled cable
m an ISDN connecting cable
m five batteries
m an operating instruction manual
m an interface cable RS 232
m the software "tipkom"
The following special accessories are available:
m Headset
Your tiptel 195 allows the connection of a headset in the factory pre-set. This accessory (order
number 4876215) enables you to call hands-free.
m Remote beeper (tone pad)
The remote beeper allows you to perform a remote interrogation of your answering machine
by telephones that do not support tone dialling.
Connection
Your tiptel 195 is designated as terminal equipment for the connection at a Euro ISDN point-to-
multipoint connection. Before operating the device, all required connecting cables have to be
connected. Turn the device so that the lower housing is easily accessible:
- Plug the long end of the curled handset cord in the
to be plugged in the corresponding receptacle of the handset.
- Only use the original tiptel AC adapter supplied (article number 45691760).
- Plug the small plug of the AC adapter into the "POWER" and plug the AC adapter into a 230V
AC power outlet.
- The plugs of the telephone connecting cable have to be plugged in the "LINE" jack and in to
an ISDN telephone wall socket.
jack. The small end of the cord has
5