Individual Charge Counter; Filter; Individual Outgoing Message - TIPTEL 195 Operating Instructions Manual

Electronic telephone book

Individual charge counter

You may set an individual charge counter for each telephone number stored in your electronic
telephone book. When you dial the specific telephone number, the charges for the call are direc-
tly assigned to this subscriber. Using this function requires that you receive charging information
from your telephone network provider.
1. Press speed dialling station next to
the display line "charge counter".

Filter

Via the filter, you have the option to switch an individual ringing tone for specific persons on or
off. In order to use this function, the calling party's telephone number must be presented (CLIP)
and the filter must be active at the corresponding entry in the telephone book.
When browsing the electronic telephone book, an activated filter is indicated by an F in reverse
at the end of the line.
1. Press the speed dialling station dis-
played next to the "filter" line.

Individual outgoing message

With this feature, you can set a message for specific callers. In order to use this function, the cal-
ling party's telephone number must be presented (CLIP). The individual message is then played
back instead of the activated standard message selected via the menu "answering machine set-
tings".
1. Press the speed dialling station next
to the display line " indv. OGM".
The display switches between "on" and "off".
off = The charge counter is set to 0. The
telephone charges are not assigned.
on = The charge counter is activated. The
total charges are displayed in the elec-
tronic telephone book - next to the
display line "name".
The display switches between "off", "call",
"VIP" and "CD".
off = filter is deactivated.
call = call filter is activated, there is no
ringing signal for this call.
VIP = VIP filter is activated; a ringing signal
is emitted although the ringing tone
volume is set to 0.
CD = call diversion; there is no ringing signal
for this call. The caller is diverted to
the default destination (see chapter
"Settings – call diversion").
You can switch between messages 1, 2 ... 7
(if recorded) and select the desired message
by pressing the speed dialling station. If the
individual message is set to "off", a pre-recor-
ded message is played back.
34