Switching On The Phone; Setting The Date And Time - TIPTEL 6240 User Manual

telephone in its closed position in the charger; the battery now
charges.
Instead of charging via the charger cradle, the power supply plug
can also be connected directly to the jack on the side of the tele-
phone. The battery can also be charged via a computer's USB
connector. Battery performance diminishes over time. If you no-
tice after a time that you need to recharge your phone more fre-
quently, replace the battery.
For safety reasons, the battery switches off before it is total-
ly discharged. If you have not used the telephone for a long
time, wait up to 10 minutes after you have plugged in the
charger. This switches the battery back on and the charging
process starts.

Switching on the phone

To switch on the phone, press the red hang up key for 3 to 5
seconds
You are then prompted to enter the SIM card PIN (if enabled for
the SIM card). Enter the PIN from the keypad, then press the
display button on the left
Note: In Settings
Prompt, you can change the SIM card PIN and en-
able/disable the prompt for it.

Setting the date and time

After switching on for the first time (and when the battery is re-
moved), the phone automatically synchronises date and time
from the service provider network.
.
(Display OK).
Security Settings SIM PIN
9