Off-Line Call Preparation (Indirect Call) - TIPTEL 195 Operating Instructions Manual

Telephone calls
After finishing the conversation:
4. Replace handset or terminate the
hands-free mode by pressing the
button .
Off-line call preparation
The off-line call preparation is initiated when dialling any number button starting from the initial
state. You can now dial the target telephone number or open the electronic telephone book by
pressing an arrow button. After having entered the target telephone number you can trigger off
further functions via the speed dialling stations.
Calling line identification presentation (CLIP)
You can either switch the calling line identification presentation on or off. CLIP is resumed after
replacing the handset.
1. Press the speed dialling station next
to the line where CLIP is displayed
For a few seconds, the display shows the
data of the last conversation:
1. dialled telephone number or subscriber
2. call duration
3. charges incurred
4. MSN initiating the call.
The incurred charges are added to the char-
ge memory. Afterwards, the device returns to
the initial state. The current data on the call
can be displayed again via the redialling fun-
ction or the call list.
The display changes between on and off.
17