Information; Charge Counter; Charges For The Entire Connection - TIPTEL 195 Operating Instructions Manual

Information

Charge counter

(service has to be activated by your local telecommunications company)
The charge counter accumulates and displays the total costs of all calls incurring for the MSN in
question. This counter can be reset and will then start with "0". Using the
switch between the charge display and the date display (time of the last reset).
From the initial state, press the following
buttons: , information
Menu
.
Reset the charge counter
1. Press the speed dialling station next
to the MSN display for which the
charges shall be reset and confirm
the safety verification afterwards.
Remark:
The incurred costs can be allocated to a specific MSN by selecting the CLIP function for this
MSN. The selection can be done from the initial state via the button sequence
– MSN6).

Charges for the entire connection

You have the option to control the charges for your entire connection, i. e. also for other terminal
equipment that is connected to your S0 bus.
From the initial state, press the following
buttons: , information
Menu
, connection
Charges for the last call:
Here, the costs incurred for the last call caused by another terminal equipment unit (not those
for your tiptel 195) are displayed.
MSN 1:
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
Σ
<< Charge
, charges
Last call
Charge :
since 18:04 01.08.97
total :
195 :
Σ
<< Charge
, charges
.
0.00
0.00
The total costs of all calls are displayed.
The charge counter is reset and the current
date is taken as the starting date for all furt-
her accumulation of charges.
1.92
76.88
30.00
106.88
The total costs of all calls are displayed.
60
button, you can
nd
2
nd , 1 – 6 (MSN1
2