Call Blocking; Call Transfer - TIPTEL 195 Operating Instructions Manual

Settings
Call blocking (continued)
Entering telephone numbers that can be
dialled although the blocking has been
activated:
1. Press button
nd
2
2. Press a speed dialling station and
enter the desired target telephone
number.
3. Press .

Call transfer

By the "call transfer" function you can transfer an incoming call (see also chapter "telephone calls
– call transfer") to another extension. Whether this function is executed via the ISDN feature ECT
(explicit call transfer) or via a non-standard procedure depends on the installed PABX. Should
your PABX not support the ECT feature, please switch this function off as described hereafter.
From the initial state, press the following
buttons: , settings
Menu
ISDN .
1. Press the speed dialling station next
to the display line "ECT".
, system ,
49
The cursor for the entry of the permitted tele-
phone number is displayed. Telephone num-
bers for emergency calls are subject to the
factory pre-set.
The corresponding telephone number is sto-
red and you may enter further telephone
numbers.
The display switches between on and off.
off = non-standard procedure call transfer.
on = ECT used for call transfer.