Call Transfer - TIPTEL 195 Operating Instructions Manual

Telephone calls
Call transfer (only for PABX operation)
You receive an incoming call and want to transfer it to another extension.
a) Transfer:
1. Press button.
R
2. Dial desired target extension number
and replace the handset.
b) Selective transfer:
You have established several connec-
tions and want to transfer the active line
to another extension without disconnec-
ting the existing established connec-
tions.
1. Press the speed dialling station next
to the display of the active "line".
2. Press the speed dialling station next
to "transfer".
3. Dial desired target extension number.
Selective transfer of a call on hold
1. Press the speed dialling station next
to the displayed connection on hold.
2. Press the speed dialling station next
to "transfer".
The call is placed on hold. You hear a dialling
tone.
After dialling, the call is transferred to the
target extension.
A selection menu is displayed.
The call is placed on hold. You hear a dialling
tone.
After dialling, the call is transferred to the tar-
get extension. You now either hear the dial-
ling tone or a call on hold is activated (if a call
was placed on hold before).
A selection menu is displayed.
The calling party is connected to a party that
has been placed on hold. A further call on
hold is activated (if existing) or you are asked
to disconnect the line.
27