You now have the option to enter that number. If you do not wish to change the pre-
settings carried out by the administrator, just leave that field empty - which should be
the normal case.
Call forwarding
Call forwarding is executed within the telephone system and can be configured indi-
vidually for every subscriber. It is possible to forward calls to internal and external
calling destinations. A maximum of two calls can be programmed for forwarding in
succession within the telephone system. An external phone number must always
contain the
for exchange connection.
Call Forwarding Unconditional (CFU)
Incoming calls are immediately routed to the call-forwarding destination. Your own
terminal does not display a notification for the call. This setting is recommended for
business trips, holidays, etc.
Call Forwarding on Busy (CFB)
Incoming calls are forwarded to another extension when your terminal is busy.
Note:
In order for the CFB feature to operate properly, the call waiting signal
must be disabled at the relevant telephones.
Call Forwarding No Reply (CFNR)
In this case, the incoming call is indicated on your terminal for a specific period of
time. If the call is not taken during this time, it is diverted to the rejection destination.
It is also possible to enable call forwarding at individual terminals (refer to the User's
Manual for your telephone system).
Charge account
You can see the current credit on your charge account here. Without any credit with
an activated charge account it is not possible to place a call with costs.
System telephone
Note:
Disregard this chapter in case you are using tiptel.com 410 or
tiptel.com 810.
Menu: Subscriber
85