Using Speed Dial To Make A Call; Answering A Call; Answering A Single Call; Answering Multiple Calls - TIPTEL VP 28 Manual

IP Video Phone

Using Speed Dial to Make a Call

You can assign the speed dial function to a DSS key. After the key is configured with a frequently
used number or a complex number, you can directly press this key to make a call.
For details, see DSS Key.

Answering a Call

Answering a Single Call

In the standby mode, tiptel VP 28 receives an incoming call and starts ringing. To answer the call,
pick up the handset, press the <SPK> key or click

Answering Multiple Calls

In the standby mode, tiptel VP 28 receives an incoming call and starts ringing.
Step 1
Step 2 You pick up the handset, press the <SPK> key, or click
tiptel VP 28 receives another incoming call and pop up a box.
Step 3
Step 4 Click to answer the call.
Plays a prompt tone, and the message "New Incoming Call: xxx" is displayed on the
Step 5
screen.
You press the soft key <Answer> to answer the new call.
Step 6
After you answer the new call, the first call is held. You can click SWAP to
switch calls. If you switch to the first call, the second call is automatically
held.

Rejecting a Call

There is an incoming call, click

Call Hold

Call hold: click the <Hold> key to hold the ongoing call.

Call unhold: click the <Resume> key to unhold the call that is held.

Multi-line conversation: If multiple calls are held, click Call Manager to check the call status.

press Up/Down navigation key switch the call which you want to select, and then exit the
manager page to click the <Resume> to resume the call.

Call Mute

To enable or disable the call mute function, press the < > key. If the call mute function is
enabled, the mute icon is displayed on the screen, and the peer party cannot hear your voice.

DND Function

In the standby mode, press the soft key <
function is enabled, the icon
You can view these calls in the call record list.

Call Transfer

You can transfer a call to other extension numbers or mobile numbers. tiptel VP 28 supports the
following call transfer modes: blind transfer, semi-attend transfer, and attend transfer.
to reject it.
> to enable the DND function. After the DND
is displayed on the screen, and all incoming calls will be rejected.
- 71 -
Using tiptel VP 28
.
..