Cleveland SteamCraft V Service Manual page 17

DEATH, INJURY, AND EQUIPMENT DAMAGE
could result from installation of a unit damaged
during shipment or storage. Equipment damaged
during shipment or storage is not covered under
warranty.
DO NOT UNPACK A DAMAGED SHIPPING
CARTON.
DO NOT INSTALL a SteamCraft V suspected of
damage.
1. Before unpacking the shipping carton visually inspect it for damage.
• If the shipping carton appears damaged, do not open the carton.
Refer to the Shipping Damage Instructions below.
• If the shipping carton is undamaged, open it and remove the
SteamCraft V.
2. Slit the four corners of the carton and peel carton sides away from the
SteamCraft V.
3. Open the door of the SteamCraft V, and remove the package of
unassembled parts. This package contains the four parts illustrated in
figure 2-8 Check that all four parts have been included in the
package.
A. Steam Generator Cover
B. Two Slide Racks
C. Fan Guard
D. Water Strainer
4. When the unassembled parts package is removed, several pre-
assembled parts can be seen inside the unit. Refer to figure 2-9. Do
not attempt to remove these parts.
A. Water Level Probes
B. Heater Elements
C. Drain Screen
5. Inspect the SteamCraft V and unassembled parts for damage or loss.
• If there is damage or parts are lost, refer to the Shipping Damage
Instructions below.
• If all items are accounted for and undamaged, proceed to Assembly
and install the unassembled parts listed in step 3.
Printed 4/90
CET-16 Service Manual
WARNING
Page 13