Chapter 6 Illustrated Parts Lists; Introduction - Cleveland SteamCraft V Service Manual

INTRODUCTION

WIRING AND SCHEMATIC DIAGRAMS
CHAPTER 6. ILLUSTRATED PARTS LISTS
This chapter lists and illustrates replacement parts for model
CET-16 SteamCraft Counter type convection steamers.
Presently, there are no significant design or replacement parts
differences among Cleveland Range steamers with this model
number.
There are a few minor operational differences among the control
panels supplied on the original equipment The operating
instructions in Chapter 3 explain these operating differences in
detail. When replacing a control panel, use the replacement
assembly listed on
version of toe control panel. Once this is installed, the unit will
operate in the same manner as all units after serial number WC
9018-90A-05.
identifies the major SteamCraft V component groups,
Figure 6-1
and references the figure(s) an which they are illustrated Each
component illustration is accompanied by a component parts list
which includes the part name, part ordering number, and quantity
used in that component group.
Table 6-1 lists SteamCraft V wiring and schematic diagrams for
DELTA and WYE connections. The diagrams are shown in
sequence at the end of this chapter.
Connections
DELTA
WYE
CET-16 Service Manual
. This assembly contains the latest
Figure 6-5
Table 6-1. Wiring and Schematic Diagrams
Wiring Diagram
Figure 6-11
Figure 6-13
Page 71
Schematic Diagram
Figure 6-12
Figure 6-14
Printed 4/90