Scan - Icom IC-FR5100 Series Handbook

.
Scan List
A total of 16 scanning lists are available for a wide
variety and flexible scanning operation. In this screen,
program scanning condition for each list.
Display Text
Enter up to a 12-character text to indicate message,
etc. and/or indicating the scan list during scanning.
Scan Type
Set the scanning type to each scan list. Scan OFF,
Normal Scan and Priority Scan are available.
The watch time period, the power ON scan function
etc. is programmed in Scan Setting screen.
Scan OFF:
Scanning operation is turned OFF.
Normal Scan:
Normal scan. Scans all selected channels. The scan
proceeds in sequence.
Priority Scan:
Priority scan. "Primary CH" and "Secondary CH" are
used as the priority channel.
The selected channels are scanned in sequence while
monitoring "Primary CH" and "Secondary CH."
When scan is paused on "Primary CH," other
channels are not monitored.
When "Secondary CH" is not set:
When a signal is detected on a channel other than
"Primary CH," scan pauses until the signal
disappears and "Primary CH" is continuously
monitored.
Scan moves and pauses on "Primary CH," if the
signal is detected on.
4-6

Scan

When "Secondary CH" is set:
− When a signal is detected on a channel other than
"Primary CH" or "Secondary CH," scan pauses until
the signal disappears and "Primary CH" and
"Secondary CH" are continuously monitored
alternately.
Scan moves and pauses on "Primary CH" or
"Secondary CH" if the signal is detected on it.
− When a signal is detected on "Secondary CH," scan
pauses until the signal disappears and "Primary CH"
is continuously monitored.
Scan moves and pauses on "Primary CH" if the signal
is detected on it.
* "Prio A" means "Primary CH," and "Prio B" means
"Secondary CH."
NOTE: The scanning channels are selected in Scan
List in in the Memory CH screen.
The compatibility of the previous and current
scan mode
Primary CH (Available when "Priority Scan" is
selected in Scan Type.)
Select the desired channel as a primary channel. The
selected channel is monitored during priority scan.
The priority A channel is used as
Prio-A CH
the primary channel.
The priority B channel is used as
Prio-B CH
the primary channel.
Scan start channel is used as the
Start CH
primary channel.
The selected channel is used as
CH Number
the primary channel.
Select
32