Download  Print this page

HP ProCurve Series 2810 Management And Configuration Manual Page 199

Procurve series 2810 switches.
Hide thumbs


Configure the priorities for the DSCPs you want to use.
Figure 6-25. Assign Priorities to the Selected DSCPs
Assign the DSCP policies to the selected VIDs and display the result.
Figure 6-26. The Completed VID-DSCP Priority Configuration
The switch will now apply the DSCP policies in figure 6-26 to packets received
on the switch with the specified VLAN-IDs. This means the switch will:
Overwrite the original DSCPs in the selected packets with the new DSCPs
specified in the above policies.
Assign the 802.1p priorities in the above policies to the appropriate
Quality of Service (QoS): Managing Bandwidth More Effectively
Using QoS Types To Configure QoS for Outbound Traffic
in this step.


Table of Contents

   Related Manuals for HP ProCurve Series 2810

This manual is also suitable for:

Procurve 2810-24gProcurve 2810-48g

Comments to this Manuals

Symbols: 0
Latest comments: