Download  Print this page

Status Messages - HP ProCurve Series 2810 Management And Configuration Manual

Procurve series 2810 switches.
Hide thumbs

Advertisement

ProCurve Stack Management
Configuring Stack Management
Message
Condition
Candidate Auto-join
Indicates a switch configured with Stack State set to
Candidate, Auto Join set to Yes (the default), and no
Manager password.
Candidate
Candidate cannot automatically join the stack because
one or both of the following conditions apply:
• Candidate has Auto Join set to No.
• Candidate has a Manager password.
Commander Down
Member has lost connectivity to its Commander.
Commander Up
The Member has stacking connectivity with the
Commander.
Mismatch
This may be a temporary condition while a Candidate is
trying to join a stack. If the Candidate does not join, then
stack configuration is inconsistent.
Member Down
A Member has become detached from the stack. A
possible cause is an interruption to the link between the
Member and the Commander.
Member Up
The Commander has stacking connectivity to the Member. None required.
Rejected
The Candidate has failed to be added to the stack.
7-48

Status Messages

Stacking screens and listings display these status messages:
Action or Remedy
None required
Manually add the candidate to the
stack.
Check connectivity between the
Commander and the Member.
None required.
Initially, wait for an update. If condi-
tion persists, reconfigure the
Commander or the Member.
Check the connectivity between
the Commander and the Member.
The candidate may have a pass-
word. In this case, manually add
the candidate. Otherwise, the stack
may already be full. A stack can
hold up to 15 Members (plus the
Commander).

Advertisement

Table of Contents

   Related Manuals for HP ProCurve Series 2810

This manual is also suitable for:

Procurve 2810-24gProcurve 2810-48g

Comments to this Manuals

Symbols: 0
Latest comments: