Download  Print this page

Using The Cli To View Stack Status - HP ProCurve Series 2810 Management And Configuration Manual

Procurve series 2810 switches.
Hide thumbs

Advertisement

Figure 7-22. Example of Using the Show Stack Command To List the Stacking Configuration for an
Individual Switch

Using the CLI To View Stack Status

You can list the stack status for an individual switch and for other switches
that have been discovered in the same subnet.
Syntax:
show stack [candidates | view | all]
Viewing the Status of an Individual Switch. The following example
illustrates how to use the CLI in a to display the stack status for that switch.
In this case, the switch is in the default stacking configuration.
Syntax:
show stack
Viewing the Status of Candidates the Commander Has Detected.
This example illustrates how to list stack candidates the Commander has
discovered in the ip subnet (broadcast domain).
Syntax:
show stack candidates
Figure 7-23. Example of Using the Show Stack Candidates Command To List
Candidates
ProCurve Stack Management
Configuring Stack Management
7-33

Advertisement

Table of Contents

   Related Manuals for HP ProCurve Series 2810

This manual is also suitable for:

Procurve 2810-24gProcurve 2810-48g

Comments to this Manuals

Symbols: 0
Latest comments: