HP ProCurve Series 2810 Management And Configuration Manual page 43

Show VLAN lists this
data when GVRP is
enabled and at least
one port on the switch
has dynamically
joined the designated
VLAN.
Figure 2-16. Example of "Show VLAN" for a Specific Dynamic VLAN
Displaying the Configuration for a Particular VLAN. This command
uses the VID to identify and display the data for a specific static or dynamic
VLAN.
Syntax: show vlan <vlan-id>
Figure 2-15. Example of "Show VLAN" for a Specific Static VLAN
Static Virtual LANs (VLANs)
Port-Based Virtual LANs (Static VLANs)
2-21