Download  Print this page

General Steps For Creating A Stack - HP ProCurve Series 2810 Management And Configuration Manual

Procurve series 2810 switches.
Hide thumbs


ProCurve Stack Management
Configuring Stack Management
Figure 7-4. Using the System Name to Help Identify Individual Switches
Default stacking configuration (Stack State set to Candidate, and Auto
Join set to Yes)
Same subnet (broadcast domain) and default VLAN as the
Commander (If VLANs are used in the stack environment, see
"Stacking Operation with a Tagged VLAN" on page 7-46.)
No Manager password
14 or fewer stack members at the moment

General Steps for Creating a Stack

This section describes the general stack creation process. For the detailed
configuration processes, see pages 7-14 through 7-38 for the menu interface
and pages 7-31 through 7-43 for the CLI.
Determine the naming conventions for the stack. You will need a stack
name. Also, to help distinguish one switch from another in the stack, you
can configure a unique system name for each switch. Otherwise, the
system name for a switch appearing in the Stacking Status screen appears
as the stack name plus an automatically assigned switch number. For
For status
descriptions, see the
table on page 7-48.
Stack with unique
system name for each
Stack named "Online"
with no previously
configured system
names assigned to
individual switches.


Table of Contents

   Related Manuals for HP ProCurve Series 2810

This manual is also suitable for:

Procurve 2810-24gProcurve 2810-48g

Comments to this Manuals

Symbols: 0
Latest comments: