Download  Print this page

HP ProCurve Series 2810 Management And Configuration Manual Page 237

Procurve series 2810 switches.
Hide thumbs

Advertisement

Figure 7-11. Example of Stack Management Screen After New Member Added
Using the Commander's Menu To Move a Member From One Stack to
Another. Where two or more stacks exist in the same subnet (broadcast
domain), you can easily move a Member of one stack to another stack if the
destination stack is not full. (If you are using VLANs in your stack environ-
ment, see "Stacking Operation with a Tagged VLAN" on page 7-46.) This
procedure is nearly identical to manually adding a Candidate to a stack (page
7-19). (If the stack from which you want to move the Member has a Manager
password, you will need to know the password to make the move.)
1.
To move a Member from one stack to another, go to the Main Menu of
the Commander in the destination stack and display the Stacking Menu
by selecting
9. Stacking...
2.
To learn or verify the MAC address of the Member you want to move,
display a listing of all Commanders, Members, and Candidates in the
subnet by selecting:
2. Stacking Status (All)
ProCurve Stack Management
Configuring Stack Management
For status descriptions, see the table on page 7-48.
New Member added in step 6.
7-21

Advertisement

Table of Contents

   Related Manuals for HP ProCurve Series 2810

This manual is also suitable for:

Procurve 2810-24gProcurve 2810-48g

Comments to this Manuals

Symbols: 0
Latest comments: