HP ProCurve Series 2810 Management And Configuration Manual page 245

Figure 7-19. Example of the Commander's Stacking Status Screen
Viewing Member Status. This procedure displays the Member's stacking
information plus the Commander's status, IP address, and MAC address.
To display the status for a Member:
1. Go to the console Main Menu of the Commander switch and select
9. Stacking ...
5. Stack Access
2. Use the downarrow key to select the Member switch whose status you
want to view, then press
for the selected Member switch.
3. In the Member's Main Menu screen, select
9. Stacking ...
1. Stacking Status (This Switch)
You will then see the Member's Stacking Status screen:
(for eXecute). You will then see the Main Menu
[X]
ProCurve Stack Management
Configuring Stack Management
7-29