Multimedia Traffic Control with IP Multicast (IGMP)
This chapter describes Multimedia Traffic Control with IP Multicast (IGMP),
and explains how to configure IGMP controls to reduce unnecessary
bandwidth usage on a per-port basis.
For the latest information on IGMP, see the software release notes posted on
the ProCurve Networking support web site at http://www.procurve.com.
For general information on how to use the switch's built-in interfaces, refer to
these chapters in the Management and Configuration Guide for your switch:
Chapter 3, "Using the Menu Interface"
Chapter 4, "Using the Command Line Interface (CLI)"
Chapter 5, "Using the Web Browser Interface"
Appendix C, "Switch Memory and Configuration"