Download  Print this page

Troubleshooting A Shortage Of Resources - HP ProCurve Series 2810 Management And Configuration Manual

Procurve series 2810 switches.
Hide thumbs

Advertisement

Troubleshooting a Shortage of Resources

The inability to configure more rules is caused by:
existing QoS configurations consuming all the rules
all the QoS resources being used.
Do the following to enable configuration of the desired policy:
1.
Use the show qos resources command to view your current rule and
resource usage.
ProCurve(config)# show qos resources
QoS Resource Usage
Type
-----------------|-----|-------|---------|--------
interface
vlan
type-of-service
device-priority
tcp- or udp-port |
5 of 5 QoS resources used
Figure 6-3. Example of Inspecting Available Rule Resources
Use the show qos commands to identify the currently configured QoS
2.
policies.
3.
Determine which of the existing policies you can remove to free up rule
resources for the QoS policy you want to implement. Depending on your
network topology and configuration, you can free up rule resources by
moving some policies to other devices. Another alternative is to inspect
the switch's existing QoS configuration for unnecessary entries or ineffi-
cient applications that could be removed or revised to achieve the desired
policies with less resource usage. Table 6-8 on page 6-15, or the informa-
tion displayed by the qos resources help command, can help you to deter-
mine the resource usage of QoS policies.
Quality of Service (QoS): Managing Bandwidth More Effectively
Rules Rules
Resources Resources
Used
Maximum Used
|
3 |
96
|
|
1 |
120
|
|
1 |
64
|
|
0 |
120
|
10 |
30
|
Preparation for Configuring QoS
Can add 93 more rules.
Required
1
|
1
1
|
1
1
|
1
0
|
2
2
|
2
All resources used; can't add Device
Priority type
6-17

Advertisement

Table of Contents

   Related Manuals for HP ProCurve Series 2810

This manual is also suitable for:

Procurve 2810-24gProcurve 2810-48g

Comments to this Manuals

Symbols: 0
Latest comments: