Preset Channels (0 ~ 9): Instant Access - Standard Horizon HX851 Owner's Manual

6.9 PRESET CHANNELS ( 0 ~ 9 ) : INSTANT ACCESS
10 Preset Channels can be programmed for instant access. Each time the
key is pressed the radio will step from one preset channel to another. If
the key is pressed and no channels have been assigned, an alert beep
will be emitted from the speaker.
6.9.1 PROGRAMMING
1. Press the
be programmed.
2. Press and hold the
nel number "
displayed.
3. Release the
" " will disappear from the display after a few second.
4. Repeat steps 2 and 3 to program the desired channels into the PRESET
memory.
5. To delete a Preset Channel: press the
channel the preset channel you want to delete is shown on the display. Press
and hold the
6.9.2 OPERATION
Pressing the
nels "0 0 0 0 0 " through "9 9 9 9 9 ". The Preset Channel number will dis-
appear after five seconds.
To exit from the saved Preset Channel menu and return to
the last selected "regular" channel, press the
6.9.3 PRESET CHANNEL SCAN
After channels have been stored into preset memory, the channels may be
scanned by following the steps below:
1. To start scanning, press the
2. To stop the scan, press the
Page 28
/ key to select a channel to
key until the preset chan-
" and a "
key. The preset channel number
key until "
key will toggle between Preset Chan-
or
" icon are
key numerous times until the
" icon is removed from the display.
/
key.
key.
key.
HX851