Table of Contents
Advertisement
RECEIVED RLY: Relay signal is received from another vessel or coast
8. To cancel the DSC distress alarm signal from the speaker, press any key.
7.3.2 CANCELING A DSC DISTRESS ALERT
If a DSC Distress Alert was sent by error the HX851 allows you to send a
message to other vessels to cancel the Distress Alert that was made in error.
Press the
key, then press the
7.3.3 RECEIVING A DSC DISTRESS ALERT
1. When a DSC Distress Alert is received, an emergency
alarm sounds.
Then channel 16 is automatically selected.
2. Press any key to stop the alarm.
3. Press the
on the vessel in distress.
4. If you wish to display the position of the vessel in dis-
tress on the "WAYPOINT" screen, go to next step, oth-
erwise press the
5. Press the
then enter the desired waypoint name (up to 11 char-
acters), described previously (select the letter/number
by pressing the
pressing the
6. The ID is the MMSI from the vessel in distress.
7. When you are finished entering the waypoint name,
press and hold the
"WAYPOINT" screen. The display indicates the distance
and direction of the vessel in distress, and the vessel
in distress is shown on the compass display by a dot ( ) icon.
8. To stop navigating to the location of the position request call:
1) Press and hold down the
2) Press the
3) Press the
HX851
station.
key several times to show information
key to return to radio operation.
key to enter the "Waypoint Input
/
key and move the cursor by
/
key).
key several times to show the
/
key to select "Radio Setup"
key, then select "Display
key.
Waypoint Input" menu,
Waypoint Input
Waypoint Input
Waypoint Input
key until "Setup Menu
Setup Menu" appears.
Setup Menu
Setup Menu
Setup Menu
Radio Setup".
Radio Setup"
Radio Setup"
Radio Setup"
Display" with the
Display
Display
Display
/
key.
Page 39
Advertisement
Table of Contents
