Standard Horizon HX851 Owner's Manual page 57

CD-38, refer to section "4.2 CONNECTING A CHART
PLOTTER TO THE CD-38".
9. Press any key to stop the alarm.
10. If you wish to display the position of the polled vessel
on the "WAYPOINT" screen, go to next step, other-
wise press the
11. Press the
Then enter the desired waypoint name (up to 11 char-
acters), described previously (select the letter/number
by pressing the
pressing the
12. The ID is the MMSI from the polled vessel.
13. When you are finished entering the waypoint name,
press and hold the
"WAYPOINT" screen appears. The display indicates
the distance and direction of the polled vessel, and
also the compass indicates the polled vessel as a dot
(  ) .
14. To stop navigating to the location of the position re-
quest call:
1) Press and hold down the
appears.
2) Press the
3) Press the
/
4) Press the
"Navigation Navigation"or "Compass
Navigation Navigation
Navigation
key.
HX851
key to return to radio operation.
key to enter the "Waypoint Input
/ key and move the cursor by
/ key).
key several times until the
/ key to select "Radio Setup"
key, then select "Display
key.
key, and select "Radio
Compass" with the
Compass Compass
Compass
Waypoint Input" menu.
Waypoint Input Waypoint Input Waypoint Input
key until "Setup Menu
Setup Menu Setup Menu Setup Menu"
Setup Menu
Radio Setup" Radio Setup"
Radio Setup". Radio Setup"
Display" with the
Display Display
Display
Radio", "Position
Radio Radio Position Position
Radio Position", Position
/ key, and press the
Page 57