Standard Horizon HX851 Owner's Manual page 46

7.5.4 TRANSMITTING AN INDIVIDUAL CALL
This feature allows the user to contact another vessel with a DSC radio. This
feature is similar to calling a vessel on Channel 16 and requesting to go to
another channel.
Pre-Programmable Calling
1. Press the
pear.
2. Press the
cancel, press the
3. Press the
"Individual Directory Individual Directory" will appear.
Individual Directory Individual Directory Individual Directory
4. Press the
want to contact.
5. Press the
to select the operating channel you want to com-
municate on and press the
6. Press the
DSC signal.
7. When an Individual Call acknowledgment is re-
ceived, the HX851 automatically changes to the
channel selected in step 5 and a ringing tone
sounds.
8. Press the
it is not busy, then key the microphone and call the
other vessel you desire to communicate with.
Manual Calling
You may enter an MMSI number manually to contact another station without
storing it in the Individual Directory.
1. Press the
pear.
2. Press the
cancel, press the
3. Press the
"Individual Directory Individual Directory" will appear.
Individual Directory Individual Directory
Individual Directory
4. Press the
the key.
5. Press the
9. To enter the desired number and move one space
to the right, press the
Page 46
key. The "DSC Call Menu DSC Call Menu" will ap-
DSC Call Menu DSC Call Menu
DSC Call Menu
/ key to select "Individual
key.)
key. The transceiver will beep, and the
/ key to select the "Individual" you
key, then press the
key again to transmit the Individual
key to listen to the channel to make sure
key. The "DSC Call Menu DSC Call Menu" will ap-
DSC Call Menu DSC Call Menu
DSC Call Menu
/ key to select "Individual
key.)
key. The transceiver will beep, and the
/ key to select "Manual
/ key to scroll through numbers, 0-
key. Repeat this procedure until all nine spaces
Individual". (To
Individual Individual Individual
/ key
key.
Individual". (To
Individual Individual
Individual
Manual", then press
Manual Manual
Manual
HX851