Position Report - Standard Horizon HX851 Owner's Manual

7.9 POSITION REPORT

The feature is similar to Position Request, however instead of requesting a
position of another vessel this function allows you to send your position to
another vessel.
To transmit a Position Send Call, you must setup the HX851 DSC Indi-
vidual / Position Call Directory with the name of the vessel(s) or person
and the MMSI of the DSC radio you wish to send your position to. To
setup this directory refer to section "7.5.1 SETTING UP THE INDIVIDUAL
/ POSITION CALL DIRECTORY".
7.9.1 SETTING UP A POSITION REPORT RINGER
The HX851 has the capability to turn off the Position Report ringer.
1. Press and hold the
appears.
2. Press the
3. Press the
the /
4. Press the
with the
5. Press the
select "Off
Off Off". Off
Off
6. Press the
7. Press the
Menu", then press the
Menu Menu
Menu Menu
radio operation.
To return to enabling the ringer tone, repeat the above pro-
cedure, press the
7.9.2 TRANSMITTING A DSC POSITION REPORT CALL
Pre-Programmable Calling
1. Press the
pear in the display.
2. Press the
port port
port". port port
3. Press key.
4. Press the
directory, then press the
5. Press the
the selected vessel.
HX851
key until "Setup Menu
key to select "DSC Setup DSC Setup" menu.
DSC Setup DSC Setup
DSC Setup
key, then select "DSC Beep
key.
key, then select "Position Report
/ key.
key, then press the
key to store the selected setting.
key twice to return to the "Setup
key again to return to
key to select "On
key. The "DSC Call Menu DSC Call Menu" will ap-
DSC Call Menu DSC Call Menu
DSC Call Menu
/ key to select the "Pos Re-
/ key to select a name in the
key.
key again to send your position to
NOTE
Setup Menu Setup Menu
Setup Menu" Setup Menu
DSC Beep" with
DSC Beep DSC Beep
DSC Beep
Position Report" Position Report Position Report
Position Report
key to
Setup Setup
Setup Setup
On" in step "5" above.
On On
On
Pos Re- Pos Re- Pos Re- Pos Re-
Page 59