Table of Contents
Advertisement
7.9.3 RECEIVING A DSC POSITION REPORT CALL
When another vessel transmits their vessels location to the HX851 the follow-
ing will happen:
1. When a Position Report Call is received, a calling alarm sounds 5 times and
NMEA DSC and DSE sentences are outputted on the CD-38 charging cradle
wires.
2. The display shows the position from the vessel
sending it's position.
3. If you wish to display the position of the received
vessel on the "WAYPOINT" screen, go to next
the step, otherwise press the
to radio operation.
4. Press the
menu, then enter the desired waypoint name (up
to 11 characters), described previously (select
the letter/number by pressing the
pressing the
5. The ID is the MMSI from the received vessel.
6. When you are finished entering the waypoint name, press and hold the
key several times until the "WAYPOINT" display is
shown. The display indicates the distance and direc-
tion of the received vessel, and also the compass indi-
cates the received vessel as a dot ( ) .
7. To stop navigating to the location of the position request call:
1) Press and hold down the
2) Press the
3) Press the
4) Press the
the
/
HX851
key to enter the "Waypoint Input
/
key).
/
key to select "Radio Setup"
key, then select "Display
key, and select "Radio
key, and press the
key to return
Waypoint Input"
Waypoint Input
Waypoint Input
Waypoint Input
/
key and move the cursor by
key until "Setup Menu
Setup Menu" appears.
Setup Menu
Setup Menu
Setup Menu
Radio Setup"
Radio Setup".
Radio Setup"
Radio Setup"
Display" with the
Display
Display
Display
Radio", "Position
Position", or "Navigation
Radio
Radio
Position
Position
Radio
Position
key.
/
key.
Navigation" with
Navigation
Navigation
Navigation
Page 61
Advertisement
Table of Contents
