Display Mode Setup - Standard Horizon HX851 Owner's Manual

Floating marine transceiver with gps
Hide thumbs Also See for HX851:
Table of Contents

Advertisement

6.4.1 TRANSMIT TIME - OUT TIMER ( TOT )
While the PTT switch is held down, transmission time is limited to 5 minutes.
This prevents prolonged (unintentional) transmissions. About 10 seconds be-
fore automatic transmitter shutdown, a warning beep sounds from the speaker.
The transceiver automatically switches to the receiving mode, even if the PTT
switch is held down. Before transmitting again, the PTT switch must first be
released, then pressed again after 10 seconds. This Time-Out-Timer (TOT)
prevents a continuous transmission that would result from an accidentally stuck
PTT switch.
The PTT switch will not operate for 10 seconds after the transceiver
automatically switches to the receiving mode by the TOT feature.

6.5 DISPLAY MODE SETUP

The HX851 display can be setup to show Radio information with GPS icon,
GPS Position, GPS Position with SOG and COG, and GPS status with the
procedure below.
1. Press and hold the
pears.
2. Select "Radio Setup
Radio Setup" with the
Radio Setup
Radio Setup
Radio Setup
the
key.
3. Select "Display
Display" with the
Display
Display
Display
key.
4. Select the desired Display type with the
Radio:
Radio
Radio
Radio
Radio
Position
Position
Position
Position
Position:
Navigation: Displays your position, SOG (Speed Over
Navigation
Navigation
Navigation
Navigation
Compass
Compass
Compass
Compass:
Compass
Waypoint
Waypoint
Waypoint
Waypoint:
Waypoint
GPS Status: Displays apparent reception of GPS satellites, including the
GPS Status
GPS Status
GPS Status
GPS Status
5. Press the
tion mode.
HX851
key until the "Setup Menu
/
Displays the "
Displays your position and current time
on the display.
Ground: your current speed), COG
(Course Over Ground: your current direction), and current time
on the display.
Displays your SOG (Speed Over Ground: your current speed),
COG (Course Over Ground: your current direction) by the
Rose Compass.
Displays the distance and direction of the received vessel, and
also the compass indicates the received vessel by dot (  ) .
bar-graph of signal strengths.
key to store the selected setting, and return to radio opera-
NOTE
Setup Menu" ap-
Setup Menu
Setup Menu
Setup Menu
/
key, then press
key, then press the
/
" icon only.
key.
Page 25

Advertisement

Table of Contents
loading

Table of Contents