Table of Contents
Advertisement
key again to return to radio operation.
To enable the ringer tone, repeat the above proce-
dure, press the
above.
7.7.3 TRANSMITTING A GROUP CALL
Pre-Programmable Calling
1. Press the
pear.
2. Press the
cancel, press the
3. Press the
and the "Select Call Station
Select Call Station" directory will appear.
Select Call Station
Select Call Station
Select Call Station
4. Press the
want to contact.
5. Press the
to select the operating channel you want to com-
municate on and press the
6. Press the
Call signal.
7. When the Group Call signal is sent, the display
will be as shown in the illustration at the right.
8. After the GROUP CALL is transmitted, all the
radios in the group will switch to the designated
channel.
9. Listen to the channel to make sure it is not busy, then
press the PTT switch and call the other vessels you desire to communi-
cate with.
Manual Calling
You may enter a Group MMSI number manually to contact without Setting up
a Group call number.
1. Press the
pear.
2. Press the
cancel, press the
3. Press the
"Select Call Station
Select Call Station" directory will appear.
Select Call Station
Select Call Station
Select Call Station
4. Press the
Page 52
key to select "On" in step "6"
key. The "DSC Call Menu
DSC Call Menu" will ap-
DSC Call Menu
DSC Call Menu
DSC Call Menu
/
key to select "Group
key.)
key. The transceiver will beep,
/
key to select "Group
key, then press the
key again to transmit the Group
key. The "DSC Call Menu
DSC Call Menu" will ap-
DSC Call Menu
DSC Call Menu
DSC Call Menu
/
key to select "Group
key.)
key. The transceiver will beep, and the
/
key to select "Manual
Group". (To
Group
Group
Group
Group" you
Group
Group
Group
/
key
key.
Group". (To
Group
Group
Group
Manual", then press the
Manual
Manual
Manual
key.
HX851
Advertisement
Table of Contents
