Strobe Light - Standard Horizon HX851 Owner's Manual

Floating marine transceiver with gps

Hide thumbs Also See for HX851:

Table of Contents

6.12 STROBE LIGHT

The STROBE feature utilizes the high-intensity strobe LED on the front of the

HX851 as a visual distress beacon. The default setting of the Strobe is on

continuously, however this may be changed so that the LED blinks the interna-

tionally-recognized Morse Code "S.O.S." message ( ... --- ... ) at a rate of 5

words per minute, flash rapidly (Blink1), or Flash slowly (Blink 2).

NOTE

To change Strobe Light operation, Refer to "8.12 LED SETUP".

1. Hold down the

key for 1 second, to active the LED.

STROBE

2. The LED function is interrupted when a signal is received or if the squelch

control is turned so audio is heard from the speaker.

3. To disable the LED function, hold down the

key for 1 second again.

STROBE

Page 34

HX851

Table of Contents