Connecting The Printer; Checking The Printer Voltage; Connecting The Mains Power - Dascom 1500 User Manual

Operating the printer

Connecting the printer

Checking the printer voltage

Make sure that the device has been set to the correct voltage (e.g. 120 V in the USA, 230 V
in Europe). To do this, check the type plate at the back of the printer. Contact your dealer
if the setting is incorrect.
Never switch on the printer if the voltage setting is incorrect, since this may
result in severe damage.

Connecting the mains power

A
Setting up your printer
Make sure that the power switch
located at the right side of the printer, is
in the position.
Connect the power cable to the power
inlet of the printer. Connect the power
cable plug to a mains socket.
A
,
2-7