Menu Access - Dascom 1500 User Manual

Using the Diagnostic Functions

Menu access

You can restrict the access to the Set-Up functions to avoid accidentally changing the Set-
Up options.
To enter Menu Access Function:
a) Make sure that the tractors are loaded with continuous feed paper and that the pa-
per select lever is set forward.
b) Turn the printer off.
c) Turn the printer back on while pressing the SEL/MENU/EXIT and SHIFT
keys.
Do not press any keys alone or in combination, except for pressing the SEL/MENU/EXIT
and SHIFT key alone when turning the printer on, to avoid initiating unexpected tests not per-
mitted for the user.
Changing Menu Access:
Press the FF/LOAD/Micro Feed Up/
Use the PARK/PRINT/
Press the SEL/MENU key to select the desired menu access parameter and to acti-
vate the SAVE&EXIT position.
Press the SEL/MENU key again to save the new value and exit the Set-Up mode
and return to the Ready state. This setting remain in effect until the next time they are
changed.
4-28
q
or the TEAR/
Menu-Access Mode
Button Menu-Access Action
PARK Move cursor Down to the next Function or Value
TEAR Move cursor Up to the next Function or Value
FF/LOAD Select the Option or Value and Move cursor Right
LF Select the Option or Value and Move cursor Left
SEL Select the Option or value and Move to SAVE&EXIT
<FUNCTIONS>
MENU-ACCESS
u
key to print the current menu access value.
p
keys to select the desired parameter.
ALL FUNCTION
NO ACCESS
Special mode