Network Menu - Dascom 1500 User Manual

Special mode
Parameter
BUSY LINE
DSR SIGNAL
DTR SIGNAL
BUSY TIME

NETWORK menu

The following settings are valid for the optional internal Ethernet adapter only.
Parameter
IP ADDRESS
GATEWAY
NET MASK
Value
DTR/RTS/SSD+/SSD-
VALID/INVALID
POWER UP/READY ON DTR is either set constantly to on
200 ms/1 sec
Value
0,0,0,0 ... 255,255,255,255
0,0,0,0 ... 255,255,255,255
0,0,0,0 ... 255,255,255,255
Description
Selects the signal indicating that the
serial interface is in busy state (buffer is
full, printer is out of paper or an error is
detected). Valid only if the READY/
BUSY protocol has been selected.
Sets the signal DSR (Data Set Ready)
valid or invalid.
(power up) or is used for handshaking
(ready on).
Selects the busy time of the serial inter-
face.
Description
Selects the IP address.
Selects the Gateway address.
Selects the address of the Subnet mask.
Set-Up mode
4-13