Dascom 1500 User Manual page 68

Using the Diagnostic Functions
Adjust the vertical print alignment at Low Speed:
Adjustment of Bi-directional Alignment for Low Speed is performed immediately,
after the adjustment value for High Speed is saved. After Paper is loaded, the format
of adjustment for Bi-directional Alignment of Low Speed is printed and the paper will
au-tomatically advance for viewing after the printing is complete. The message of "Bi-
Dir Align Adjust 2 = xx" is printed.
Low Speed
Align Adjust 2 = 08
An adjustment value is chosen using PARK/PRINT/
adjustment range is "01-15", and the center value is "08". By pressing SEL/MENU/
EXIT key, the adjustment value for Low Speed is determined and saved.
Printing new values:
The new adjustment values of Bi-directional Alignment is printed using 10cpi, Draft.
The paper is automatically advance for viewing after the printing is complete.
Align Adjust 1 = xx
Align Adjust 2 = xx
Exit from Printing Alignment Adjustment mode:
Turn off the printer.
4-24
Special mode
q p
or the TEAR/ key. The