Dascom 1500 User Manual page 80

Replacing the Ribbon Cartridge
Insert the recess
mounting.
Push the cassette into its mounting until it clicks into position.
When placing the new ribbon cartridge on the carriage, make sure that the thin ribbon does not
become bunched or folded at the printhead. Readjust the print gap to achieve good print quality.
Close the cover of the printer.
Use the printing test function to check printing. See "Printing Test Function" on page 4-
21 in chapter 4 "Special mode".
5-6
B
on the bottom of the ribbon cassette into the holding pin
B
C
Maintenance
C
of the