Overview Of The Set-Up Mode - Dascom 1500 User Manual

Set-Up mode

Overview of the Set-Up Mode

Your Printer has eleven function menus in Set-Up mode.
When you press the PARK/PRINT/
previous <FUNCTIONS> menu is printed.
}
PRINTER CONTROL
}
FONT
}
SYMBOL SETS
}
SET-UP
}
INTERFACE
}
NETWORK
}
COMMON (PUSH TRAC)
}
PULL TRACTOR
}
FRICTION
}
RCALL-FACT
}
SAVE&EXIT
The following table summarizes the purpose of each function.
Function
PRINTER CONTROL
FONT
SYMBOL SETS
SET-UP
INTERFACE
NETWORK
COMMON (PUSH
TRAC)
PULL TRACTOR
FRICTION
RCALL-FACT
SAVE&EXIT
4-4
q
key or the TEAR/
Description
Changes the emulation (generally or by interface).
Selects the Font, the Draft mode (Normal or High Speed
Draft) and the character pitch.
Selects the IBM Set, code page (IBM), the character set
(Epson) and the style of the zero character (slashed/
unslashed).
Selects the print direction: unidirectional, bidirectional or
softcontrol printing. Specifies the effect of CR (Carriage
Return) and LF (Line Feed) codes. Selects timeout, language,
safe panel and the printhead impact.
Changes settings for all interfaces.
Changes network settings of the integrated print server
(option).
Changes push tractor settings (e.g. line density, margins, tear-
off function).
Changes pull tractor settings (e.g. line density, margins, tear-
off function).
Changes settings for the single sheet mode (e.g. line density,
margins, load function).
Resets all values of the Set-Up menu to the factory settings.
Saves the settings and exits Set-Up mode.
Special mode
p
key, the following next or