Paper Types; Using The Tractor As Pull Tractor - Dascom 1500 User Manual

Operating the printer

Using the tractor as pull tractor

By default the tractor of your printer is mounted at the rear and works as push tractor.
You can use the tractor as pull tractor also. Because the paperway is more straight in pull
mode this may be useful if you want to print critical paper types.
This section describes how to remove the push tractor and install it as pull tractor.
B
A
C
Open the printer cover.
Slightly press the single sheet feeder to
the right or to the left, until the holding
pin comes free from its recess. Remove
the feeder.
Press the two hooks
cover
Press the two levers
C
remove the tractor.
Paper handling
A
and remove
B
.
C
upward and
2-29