Single Sheets - Dascom 1500 User Manual

Paper handling

Single sheets

2-20
Operating the printer
Move the paper select lever backward to
Single Sheet position.
If necessary, readjust the Print Gap
lever for continuous forms (see section
"Print Gap Lever" on page 2-17).
Make sure that the printer is turned on.
Raise the single sheet feeder until it
locks into its mounting.
Align the left paper guide with the mark
on the left of the single sheet feeder.
Adjust the right paper guide to the
width of the paper used.
Insert a sheet of paper. Make sure that
the bottom edge of the paper engages
snugly with the platen. The paper will
automatically advance to the top-of-
form posi-tion if the Single Sheet Load
option of the Setup mode is set to
Automatic.
The factory setting for the Single Sheet
Load option is automatic loading after pa-
per detection. If you set this option to man-
ual, you will have to press LOAD /
EJECT to feed the paper.